A quick look at some new arrivals!
So, our new line of products are on their way to us as we speak and will be available from your local UnitedBikeCo dealer in the next two weeks.
We thought this would be a good enough excuse to showcase some of the products that we have spent the past year developing.
To start with, The Incarnate frame
Built for absolute abuse!
Designed to have a responsive and stiffened back end with the all-new ultra slim cast wishbone. Tested extensively through CAD aided machine work software to implement extreme force and handed to team riders to give a good battering. Shallower pitched seat tube angle to move the bottom bracket forward making the feel of the bike smaller without changing the top tube length.
13” slammed back end with thickened chain stays. Top and Down tube gussets for extra strength out the front. Relatively steep head tube angle at 75.5 to keep front-end tricks responsive. Finished in flat trans brown and flat trans smoked black.
The trails and park frame The Knightsbridge, This thing is built to blast! Complete with welded lugs to throw them anchors down when needed.
Coming in at the bigger end of the spectrum, the Knightsbridge is designed to roost! Starting at 21.125 and working its way all up to 21.625 this frame is an absolute weapon. Thickened tubing throughout to keep your mind at ease for those inevitable hang-ups, widened BB for extra sprocket clearance on those who like to run a bigger sprocket. Double S bend chain stay for added tyre clearance and a 13.9” back end. Welded brake lugs and cable guiding for the anchors. Finished off in gloss Merlot Red or gloss raw with graphics drawn by Tyson himself and to give a nod at the TRU frame we have opted to go with a head tube badge rather than sticker.
28 wide 8.6 tall 10 degrees back sweep and 2 up sweep with butted tubing. Done! Jordan being the smaller rider only wanted the 8.6 but suggested a bigger size should anyone else take their fancy on some AIR JORDAN bars. 9.3 rise for the taller riders.
With the PURGE stem we wanted strength and durability so we went with a fully CNC 6061 Ali block including a CNC’d United graphic on the side. You will notice the clamping system clamps completely shut up front. This is to stop the un-even tightening. Simply tighten the front bolts to lock your bars in place evenly then clamp down on the back to fully secure your bars in place.
The stem comes with a 49mm reach and a 34mm rise. Giving you the option to ditch those ugly headset spacers and tidy up the look of your bike.
Available in Black or Polished.
Hit the product pages to get your full spec info on the new range.
Leave a comment