Dinero Forks

united_dinero_forks_detail_2united-dinero-forks-bmx-forks-2united-dinero-forks-bmx-forks-4united_dinero_forks_detail_4united_dinero_forks_gloss_black_gbunited-dinero-forks-bmx-forksunited_dinero_forks_detail_1united-dinero-forks-bmx-forks-1united_dinero_forks_detail_3united_dinero_forks_detail_5united_dinero_forks_detail_6united_dinero_forks_gloss_red_gbunited_dinero_top_cap_colours
  • united_dinero_forks_detail_2
  • united-dinero-forks-bmx-forks-2
  • united-dinero-forks-bmx-forks-4
  • united_dinero_forks_detail_4
  • united_dinero_forks_gloss_black_gb
  • united-dinero-forks-bmx-forks
  • united_dinero_forks_detail_1
  • united-dinero-forks-bmx-forks-1
  • united_dinero_forks_detail_3
  • united_dinero_forks_detail_5
  • united_dinero_forks_detail_6
  • united_dinero_forks_gloss_red_gb
  • united_dinero_top_cap_colours

We wanted to make sure every last detail was fine tuned and scrutinized before finally releasing the United Dinero forks. By utilizing investment casting technology we were able to the conventional dropout position and move these into the centre of the legs. By using a gradual radius where the dropout meets the leg, it thickens at the base, creating a vastly stronger dropout than on a regular welded one. By curving the very bottom of the leg we have prevented any catching when getting all locked in with front peg grinds.

The neat embossed logo is there to add a nice finishing touch. To increase tyre clearance these forks have a tighter radius on the legs than traditionally found, and it is all connected by a completely overhauled steerer tube. What you end up with is a clean and simple looking street tough fork, with no welds for pegs to sit on and crack, all weighing in at just 2.02 lbs / 920 gm. Made from full post weld heat treated seamless 4130 cromo, and put through their paces by our team.

Specs
100% post weld heat treated seamless 4130 cromo
Integrated 10mm dropouts using invest cast technology
Butted, fluted and tapered legs
Embossed logo at bottom of fork legs
Angled fork leg ends for grind clearance
Dropouts in centre of legs for extra strength and stability
Dropouts feature 'perfect fit' with 34mm to 38mm OD pegs
Tighter radius for improved large tyre clearance (2.3 in)
Internal and externally machined 1pc steerer tube with integrated bearing race
7075-T6 top cap with sunken 6mm allen bolt for 'hollow' look
ED rust proof coated before painting
31.09mm offset
2.02 lbs / 920 g
Gloss Black, Gloss Green, Trans Orange, Gloss Raw, Gloss Orange, Gloss Red, Smoked Chrome